Tuesday, May 21, 2024
HomeCameraHow To Reset Owlet Camera

How To Reset Owlet Camera

As an Amazon Associate, I earn from qualifying purchases

To reset the Owlet Camera, follow these easy steps: power off the camera, remove the battery, wait 10 seconds, reinsert the battery, and power on the camera. Now you can effortlessly reset your Owlet Camera whenever required.

The Owlet Camera is an inventive device that delivers peace of mind for parents by letting them monitor their baby remotely using a smartphone app. However, there may be instances where you are required to reset the camera due to connectivity problems or other technical glitches.

We will guide you through the procedure of resetting the Owlet Camera. By following the steps outlined below, you will be able to reset your Owlet Camera quickly and smoothly, ensuring that it performs correctly and continues to provide a faithful monitoring solution for your baby.

How To Reset Owlet Camera

Troubleshooting Common Issues

Understand how to troubleshoot common problems with your Owlet Camera by following easy steps to reset the device. Smoothly resolve any technical problems and enjoy seamless monitoring of your baby.

Camera Not Responding: Steps To Restart The Device

If your Owlet Camera is not responding, don’t panic. Here are some straightforward steps you can take to restart the device and troubleshoot common problems:

  • Check the power source: Confirm that the camera is correctly plugged into a working power outlet. If it’s connected to a power strip, try plugging it directly into the wall socket.
  • Power cycle the camera: Press and hold the power button on the back of the camera for about 10 seconds until the LED light turns off. Then release the button and wait a few seconds before pressing it again to turn the camera back on.
  • Reset the camera: Find the reset button on the back of the camera and press it with a paperclip or a similar tool. Hold the button for about 15 seconds until you see the LED light flash rapidly. The camera will then reset to its default settings.
  • Check the Wi-Fi connection: Confirm that your Wi-Fi network is functioning correctly. If there’s a problem with the Wi-Fi signal, move the camera closer to the router or consider using a Wi-Fi extender.
  • Update the firmware: Make sure that your Owlet Camera has the latest firmware installed. You can check for updates in the Owlet app or on the Owlet website.

Resetting The Network Settings: Reconnecting To Wi-Fi

If you’re experiencing connectivity issues with your Owlet Camera, resetting the network settings can help resolve the problem. Here’s how you can reconnect the camera to Wi-Fi:

  • Open the Owlet app: Launch the Owlet app on your smartphone or tablet.
  • Navigate to the camera settings: Go to the camera settings within the app. This is usually found in the “Settings” or “Devices” section.
  • Select the camera: Choose the Owlet Camera that you want to reconnect to Wi-Fi.
  • Tap on “Reset Network Settings”: Look for the option to reset network settings and tap on it. This will remove the camera’s current Wi-Fi configuration.
  • Follow the on-screen instructions: The app will guide you through the process of reconnecting the camera to Wi-Fi. Make sure to enter the correct Wi-Fi network name and password.
  • Test the connection: Once you’ve completed the setup, test the connection to ensure that the camera is successfully connected to Wi-Fi.

Reinstalling The Owlet App: Resolving App Connectivity Problems

How To Reset Owlet Camera

If you’re experiencing app connectivity issues with your Owlet Camera, reinstalling the Owlet app can usually help resolve the problem. Follow these steps to reinstall the app:

  • Uninstall the app: Find the Owlet app on your smartphone or tablet and uninstall it. This procedure may differ depending on your device, but typically, you can long-press on the app icon and choose the option to uninstall.
  • Download the app: Visit the App Store (for iOS devices) or Google Play Store (for Android devices) and search for “Owlet.” Download and install the app on your device.
  • Open the app: Launch the newly installed Owlet app and sign in to your account.

Factory Reset: Restoring The Camera To Default Settings

Restoring the Owlet Camera to its default settings is a straightforward approach known as a factory reset. This restores the camera to its original settings, delivering a fresh start for troubleshooting or personalization. By following a few steps, you can effortlessly reset your Owlet Camera and optimize its performance.

A Factory Reset is a useful option when you encounter problems with your Owlet Camera or like to start with a clean slate. By completing a Factory Reset, you can restore the camera to its default settings. However, it’s crucial to prepare and understand the steps involved in this procedure.

Here’s a quick guide on how to complete a Factory Reset and reconfigure your Owlet Camera afterward.

Preparing For A Factory Reset: Important Considerations

Before you proceed with a Factory Reset, there are a few things to keep in mind to ensure a smooth procedure and avoid any unwanted difficulties. Here are some crucial considerations:

  • Confirm that you are connected to a stable Wi-Fi network and have a reliable internet connection.
  • Take note of your camera’s current settings or configurations, as they will be reset during the process.
  • Remove any accessories or other devices that are connected to the Owlet Camera.
  • Confirm that the camera is completely charged or connected to a power source.

Functioning A Factory Reset: Steps To Restore Default Settings

To complete a Factory Reset on your Owlet Camera, follow these steps:

  • Find the reset button on the back or bottom of the camera.
  • Using a small, pointed object like a paperclip or pin, press and hold the reset button for about 30 seconds.
  • Release the reset button once the camera’s status light starts blinking rapidly.
  • Wait for a few minutes until the camera finishes the reset function. The quality of light should change to a solid green color.
  • Your Owlet Camera has now been restored to its default settings successfully.

Reconfiguring The Camera: Setting Up After A Factory Reset

After completing the Factory Reset, you need to reconfigure your Owlet Camera to get it up and running again. Follow these steps to set up the camera:

  • Open the Owlet app on your smartphone or tablet.
  • Log in to your Owlet account or create a new one if required.
  • Tap on the “Add a New Camera” option in the app.
  • Follow the on-screen prompts to reconnect the camera to your Wi-Fi network.
  • Once the camera is successfully connected, you can customize the settings according to your choices.

Remember to test the camera’s functionality and ensure that it’s performing as expected after the reconfiguration.

Completing a Factory Reset can be a helpful troubleshooting method or a way to start fresh with your Owlet Camera. Just make sure to prepare beforehand, follow the correct steps, and reconfigure the camera correctly.

Contacting Owlet Support: Further Assistance And Troubleshooting

If you need additional help or need to troubleshoot your Owlet Camera, contacting Owlet Support is the best way to resolve the problem. They can guide you on how to reset your camera and provide personalized help to ensure it is functioning correctly.

How To Reset Owlet Camera

Exploring Online Support Resources: FAQs and Knowledge Base

  • Visit the Owlet website to access their complete FAQs and Knowledge Base.
  • Find solutions to common problems and troubleshooting tips.
  • Browse through a wide range of topics to help resolve any concerns.
  • Acquire insights and valuable information from other Owlet users’ experiences.
  • Save time by exploring the online resources before reaching out to customer support.

Contacting Owlet Customer Support: Phone, Email, And Live Chat Options

  • If you like direct service, Owlet shows multiple methods to contact their customer support team.
  • Offer them a call on their faithful helpline to discuss your concerns.
  • Send an email with detailed information about your troubleshooting needs.
  • Engage in a live chat session to receive real-time support and guidance.

Submitting A Support Ticket: Escalating Complex Issues

  • For more complex problems that cannot be resolved through other channels, submitting a support ticket is the way to go.
  • Deliver exact information about your problem, including any error messages you have encountered.
  • Be sure to mention any troubleshooting steps you have already taken.
  • Once your ticket is submitted, Owlet’s support team will review and respond to your inquiry as soon as possible.
  • In case you have multiple concerns or ongoing problems, a support ticket helps ensure your problems are given appropriate attention and follow-up.

Remember, exploring online resources can usually bring short solutions to your camera reset conditions. If you still need additional help or encounter more complex problems, don’t hesitate to contact Owlet’s customer support team through phone, email, live chat, or by submitting a support ticket.

They are dedicated to promptly helping you get back on track with your Owlet Camera.

Frequently Asked Questions On How To Reset Owlet Camera

Why Is My Owlet Camera Not Working?

Your Owlet Camera may not be working due to a combination of reasons such as connectivity problems or power issues.

How Do I Reconnect My Owlet Cam To Wi-Fi?

How To Reset Owlet Camera

To reconnect your Owlet Cam to Wi-Fi, follow these steps:

1. Open the Owlet app on your device.

2. Go to the Settings menu and pick”WiFi Setup. ”

3. Choose your WiFi network from the available options.

4. Enter your WiFi password when prompted.

5. Wait for the Owlet Cam to connect to the Wi-Fi network.

6. Once connected, you’re ready to use your Owlet Cam again.

How Do I Update My Owlet Camera?

To update your Owlet Camera, follow these steps:

1. Check for software updates in the Owlet app.

2. If an update is available, download and install it.

3. Make sure your camera is connected to Wi-Fi during the update process.

4. Once the update is done, restart your camera for the shifts to take effect.

How Do I Turn Off The Red Light On My Owlet Camera?

To turn off the red light on your Owlet Camera, go to the settings and find the option to deactivate the light.


To end, resetting your Owlet Camera is an easy and effective solution to resolve any problems or glitches you may encounter. By following the step-by-step instructions outlined in this blog post, you can effortlessly reset your camera and restore it to its optimal functionality.

Remember to power off the camera, remove the batteries, reset the Owlet Base Station, and reconnect everything correctly. Taking these essential steps will ensure a smooth and hassle-free reconfiguration and let you continue monitoring your little one with peace of mind.

Whether you are experiencing connectivity problems or other technical complications, a speedy reset can usually do the trick. Don’t allow camera problems to interfere with your capability to keep an eye on your baby – just follow the instructions provided and get your Owlet Camera back up and running smoothly in no time.



Please enter your comment!
Please enter your name here

Most Popular

Recent Comments